DeWalt 10" Jobsite Table Saw w/ Rolling Stand DWE7491RS Reviews

Heavy use, and while cutting trim the blade came loose for the first time; they tightened it hard and kept working.

Same model here: the special table coating resists corrosion and lets wood slide easily, but it scratches easily and is hard to maintain once worn.

Good for ripping trim, moldings and paneling, but large 3/4 inch sheets are awkward because the stand shifts when pushing them.

Found odd wear marks on the stock blade at the first blade change on a saw bought new; unsure whether it is a blade defect or an arbor problem.

Seven years of dependable use with a dust collector, but the fence top has tilted out of square with no adjustment and a replacement costs about half the saw price, so they would not buy it again.

Cuts thick stock and can be set up accurately without power issues, but it loses that accuracy quickly and is light enough that heavy boards push it around. Still fond of it.

Found the saw fine in general but did not trust it for ripping very thick stock, so used a circular saw and hand saw instead.

Easy to tuck into a shop corner, but they want a better fence with a way to attach featherboards for miter and strip cuts.

Cuts fine out of the box for cabinets and boxes in plywood, pine and 2x stock, but is not a precision machine and an upgrade to a cabinet saw is planned.

New saw had play in the motor housing and a blade off parallel after setup, fixed by shimming; support calls and a warranty claim went unanswered, though the saw still cuts well.