Reddit · r/MilwaukeeTool · 19 days ago
Original unit now lets bits fall out of the chuck, which they have heard is a known problem.
Home/Reviews
Fresh experiences from real owners, collected from Reddit, YouTube and blogs and linked to their sources.
Reddit · r/MilwaukeeTool · 19 days ago
Original unit now lets bits fall out of the chuck, which they have heard is a known problem.
Reddit · r/Tools · 71 days ago
In place of a 12V hydraulic driver, and with a small PowerStack battery, it stays close in weight, is more compact front to back, handles better and drives about twice as fast.
Reddit · r/Tools · 75 days ago
With a 1.7Ah PowerStack battery it gives a perfect balance of weight, power and size, and is a must-have in their kit.
Reddit · r/Dewalt · 95 days ago
In place of an earlier model it works just as well and feels the same, but it does not try to snap the wrist when a bit sticks.
Reddit · r/Dewalt · 106 days ago
A $60 bare-tool clearance find a year earlier that has been great for casual DIY use.
Reddit · r/Tools · 119 days ago
Next to a Milwaukee equivalent it holds up, though the Milwaukee's brake and metal gear selector beat the plastic selector here.
Reddit · r/Dewalt · 142 days ago
A kit with two 4Ah batteries for $230 a couple of months ago, and it makes a good replacement for the older model, especially when batteries are needed.
Reddit · r/Dewalt · 199 days ago
A recent purchase that makes a grinding noise as it comes to a stop, which gets worse with a bigger bit such as a hole saw.
Reddit · r/Dewalt · 258 days ago
The anti-kickback feature triggers over nothing when mixing grout and also acted up when drilling through plywood, which is irritating.
Reddit · r/Dewalt · 269 days ago
Two of them handle concrete, blocks and everything in between, punching above their weight for hammer drilling.
Reddit · r/Dewalt · 269 days ago
Not yet pushed through heavy masonry work, but easily their favorite drill so far.
Reddit · r/Dewalt · 288 days ago
Their drill does not show the poor clutch behavior seen in a review video and would be returned under warranty if it did.
Reddit · r/Dewalt · 294 days ago
The same loose forward/reverse switch problem showed up on their own unit, and a repair is the open question.
Reddit · r/Dewalt · 304 days ago
Converted to a 3/8 wrench and used four or five times a week for years on a small power-stack battery; heavily abused and still performing.
Reddit · r/Dewalt · 309 days ago
Initially unsure about the precision first mode, but after a few uses finds it a handy built-in screwdriver-like feature that saves reaching for a drill.
Reddit · r/Dewalt · 334 days ago
An awesome drill bought a week earlier, and they grabbed the last two they could find in their whole state.
Reddit · r/Dewalt · 337 days ago
A pretty strong drill in a small body, handling precision work and holes alongside an impact driver.
Reddit · r/Dewalt · 347 days ago
Part of a family of these drills they own, though the hammer function goes unused since a dedicated hammer drill handles that work.
Reddit · r/Dewalt · 348 days ago
A test with a big spade bit biting into wood still slapped their ribs, but the anti-kick engaged, and the feature is valued.
Reddit · r/Tools · 353 days ago
Brand-new unit makes a grinding-like noise in low gear at low speeds, raising worry about missing factory grease compared with their older drills.
Reddit · r/Tools · 353 days ago
Hammer drill from the same XR line makes nearly the same low-gear sound that another owner worried was a grinding noise.
Reddit · r/Dewalt · 368 days ago
Family vehicles, tractors and industrial maintenance work all went fine, and a hunt for a bolt it could not break loose has not turned one up yet.
Reddit · r/Dewalt · 369 days ago
Career mechanic who finds almost nothing it cannot handle, and who only reaches for a bigger wrench when using long extensions and a wobble.
Reddit · r/Dewalt · 369 days ago
A kit deal with a ratchet and battery for $269 brought it home, and the result is a pretty happy owner.
Reddit · r/Dewalt · 369 days ago
The toughest automotive jobs such as torsion bars and axle bolts go to it, and the strongest wrench affordable is the advice for that kind of work.
Reddit · r/Dewalt · 414 days ago
Chuck trouble on their drill pushed them to buy a replacement.
Reddit · r/Dewalt · 415 days ago
Capable of handling nearly anything a homeowner would ask of a drill, from their own use.
Reddit · r/MilwaukeeTool · 475 days ago
A deck project full of 6 inch lag screws went through without trouble after a weaker driver was swapped out.
Reddit · r/MilwaukeeTool · 476 days ago
Serves as the everyday driver, with torque that covers nearly all of their work and a bigger wrench for anything more.
Reddit · r/Dewalt · 477 days ago
A few years of use, going through anything needed except concrete, and it feels twice as powerful with a 5Ah battery.
Reddit · r/Dewalt · 482 days ago
With a busted eardrum a normal impact is annoying, so this quiet hydraulic driver is a game changer.
Reddit · r/Dewalt · 487 days ago
The first setting works as a beefed up electric screwdriver for control, yet it still drives lags and bigger fasteners, and it is quieter than an older impact.
Reddit · r/Dewalt · 488 days ago
Stunning for its size, a bit noisy, drives big structural lags easily; planning to keep it until it dies.
Reddit · r/Dewalt · 488 days ago
Homeowner who regularly drives long screws without trouble; only struggles with concrete screws in undersize holes.
Reddit · r/Dewalt · 488 days ago
The most torque of any driver they have, with 3 inch decking screws barely needing impacts until nearly sunk, though the compact 850 is preferred for most work.
Reddit · r/Dewalt · 489 days ago
Full power and speed jobs and tight quarters go to it, alongside a small quiet M12 hydraulic driver.
Reddit · r/Dewalt · 513 days ago
Minor complaint that the gear selector lettering wore off very quickly.
Reddit · r/Dewalt · 516 days ago
A cheap secondhand unit whose chuck loosens when stopping short, so it is fine but not a sole drill.
Reddit · r/Dewalt · 516 days ago
A year on all kinds of jobs, and it is the one reached for most among a handful of 20V drills.
Reddit · r/Dewalt · 517 days ago
Three years of abuse and it still rips, though the chuck got a bit messed up.
Reddit · r/Dewalt · 517 days ago
Go-to drill for almost everything, with the chuck and the light singled out as favorite features.
Reddit · r/Dewalt · 517 days ago
Zero reason to get any other drill.
Reddit · r/Dewalt · 517 days ago
Loved above all for its small size.
Reddit · r/Dewalt · 518 days ago
A first compact drill for lighter tasks, bought on its reputation, and it turned out awesome.
Reddit · r/Dewalt · 518 days ago
Great drill that works perfectly as a dedicated drill next to a rotary hammer and an impact driver.
Reddit · r/Dewalt · 518 days ago
No complaints over a long stretch of use, though it was later traded in for the hammer-drill version for convenience.
Reddit · r/Dewalt · 518 days ago
The best drill in the brand lineup for them, with real weight and size savings and enough power for large bits without a hammer function.
Reddit · r/Dewalt · 518 days ago
Five of them handle deck hidden-fastener clips, adjusting finely enough not to overdrive clips that larger drills snap.